,

iSecure ICL-12VDC-1CH-Relay

iSecure ICL-12VDC-1CH-Relay 433MHz Single-Channel Wireless Receiver in a Plastic Enclosure – Used for Gate Automation & Garage Control – 12VDC Powered

iSecure ICL-433MHz-4Button-Remote

iSecure ICL-433MHz-4Button-Remote - Supplied with CR2032 Battery - Used with ICL-12VDC-4CH-Relay

This product is currently unavailable.

iSecure ICL-12VDC-1CH-Relay 433MHz Single-Channel Wireless Receiver in a Plastic Enclosure – Used for Gate Automation & Garage Control – 12VDC Powered

Features :-

  • Model: ICL-12VDC-4CH-Relay
  • Working Voltage: DC 6-30V
  • Product Type: 4-Channel Remote Control Switch
  • RF Working Mode: ASK Superheterodyne Reception
  • Modulation Mode: ASK
  • Three Working Modes: Momentary / Toggle / Latched
  • Matching Mode: Intelligent Learning Code
  • Quiescent Current: 5mA
  • RF Frequency: 433MHz
  • Output Current: ≤10A
  • Receiving Sensitivity: >104dbm

Instructions :-

Clearing All Stored Remotes :

Push the learning button on the receiver 8 times , and the codes will be cleared. After clearing the stored transmitters, all transmitters will need to be relearnt by the receiver.

1. Learning the transmitter : (Momentary Mode)

Press the learning key on the receiver 1 time, Wait for a moment, the LED will be off, it comes into the learning state.
Press the remote button, LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again, learning successfully.

2. Learning the transmitter : (Toggle Mode )

Press the learning key on the receiver 2 times, Wait for a moment, the LED will be off, it comes into the learning state.
Press the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully.

3. Learning the transmitter : (Latched Mode )
Note: When you choose for Interlocking mode, in order to learn more remote control, you need to learn two different buttons, the first time learn is for “ON”, the second time learnt for “OFF”.

For example : button A = ON , button B = OFF
Push the learning key on the receiver 3 times , the LED (on the Receiver) will blink 3 times. When the LED is on, press the button of the remote control (you want to let it learn), Push the remote button A, LED will flash for 3 times. Push the remote button B, Led will flash for 3 times . After 3 seconds, the LED indicator will be off, Learning to succeed.

Please enable JavaScript in your browser to complete this form.
Name
Shopping Cart
Scroll to Top