Digital Signage, Display Solutions, LED Accessories
iSecure LPH300S5U8F
iSecure LPH300S5U8F Display Switching Power Supply – 230VAC Input – 5VDC 60A 300W Output For LED Cabinets, Receiving Cards & Controllers
SKU: LPH300S5U8F
Categories: Digital Signage, Display Solutions, LED Accessories
Tags: Display, Indoor, iSecure, LED, LED Power Supply, Power Supply
iSecure LPH300S5U8F Display Switching Power Supply – 230VAC Input – 5VDC 60A 300W Output For LED Cabinets, Receiving Cards & Controllers
iSecure LPH300S5U8F is a 300W fan-less LED display power supply. The input voltage rang is 176～264VAC and output voltage is 5VDC. It can be used for Led display, LED indicator light and other LED display products. This product is ultra-thin design, with a height of only 30mm, and can adapt to a variety of box size requirements. Super highefficiency, compact shell design and good heat dissipation ensure the long-term stable work.
Key Features :-
- Standard slim case, 30mm height Converting 220VAC to 5VDC
- Input Volt: 176~264VAC powering for LED display, light etc
- Working temp: -40℃~ 70℃ (refer to derating curve)
- Fan-less, air-cooled
- Protection: Short circuit/Overload
- Reference standard: 100% aging test GB4943/EN60950/GB2324/EN55022/GB/T17626. High efficiency & reliability IEC61000-4,-6-1,-6-2,\GB17625.1-1998/GB/T14714.
- 2 years warranty
| Model | LPH300S5U8F | |
| Input | Input voltage | 176～264VAC |
| Input current | 240VAC/4A | |
| Efficiency | ≥86.5% | |
| Frequency range | 47～63HZ | |
| Leakage current | <1.5mA/230VAC | |
| Inrush current | Cold start, 50A/230VAC | |
| PFC | – | |
| Output | DC voltage | 5V |
| Rated current | 60A | |
| Rated power | 300W | |
| Voltage ADJ. range | — | |
| Ripple & Noise | ＜200mVp-p | |
| Setup, rise | 2500ms，50ms/230VAC at full load | |
| hold up time | 5ms/230VAC at full load | |
| Line regulation | ±0.5% | |
| Load regulation | ±2.0% | |
| Voltage tolerance | ±3.0% | |
| EMC | Interrupt, fall | Compliance to: EN6100-4-11/C |
| Vibration | 10~500Hz, 2G 10min. /1 cycle, 6 cycle each X, Y, Z axes | |
| Shock | 20G/11mS pulse, 3 times at each X, Y, Z axes | |
| Safety | Safety standard | Compliance to: GB4943/UL60950 |
| Withstand voltage | I/P-O/P: 3.0KVac/10mA; I/P-CASE: 1.5KVac/10mA; O/P-CASE: 0.5KVAC/10mA 1min for | |
| Isolation resistance | I/P-O/P: 100M ohms; I/P-Case: 100M ohms; O/P-Case: 100M ohms | |
| Protection | Over voltage | / |
| Over load | 110～150% rated Hiccup mode, auto-recovery | |
| Over current | 72-92A error eliminated, auto-recovery | |
| Short circuit | Hiccup mode, auto-recovery | |
| Environment | Working Temp&humidity | -40~70℃ 20%~95%RH non-condensing （Refer to Derating Curve） |
| Storage Temp&humidity | -40℃~85℃; 10%~95%RH non-condensing | |
| Vibration | 10~500Hz, 2G，10min/1 cycle, 60min. each along X, Y, Z axes | |
| Impact | 20G，last 11mS，3 impacts along X, y and Z axes | |
| Altitude | the ambient temperature derating of 0.6 ℃/100m for operating altitude higher | |
| Reliability | MTBF | Under 25℃: 100000Hrs, MIL-217 Method 2 |
| Others | Size | 192*82*30 mm（L*W*H） |
| Packing | 0.42Kg/pc, 30pcs/ctn，13.6KG/ctn | |
| Cold mode | □free air convection ☑with fan | |
| More options | □ PCB double side conformal coating □ Terminal with cover □ low temp start | |
| *In order to extend the service life, it is recommended to leave 30% more allowance when loading. For example, if the equipment needs 100W power, please choose the power supply over 130W. *Ripple&noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. *All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature。 *the auxiliary heat dissipation of aluminum plate with an area of 300 * 300 * 5mm must be used when full load working. *The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. All our EMC tests are carried out by mounting samples on metal plates. |
||
